|
|
|
Angle flat push-on receptacles 2,8 mm
Conductor cross section 0,5-1,0 mm² Conductor cross section 1,0-1,5 mm² Conductor cross section 0,14- 0,25 mm Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
Angle flat push-on receptacle 22.804.116
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.116
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.126
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.126
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.316
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.316
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.326
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.326
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.116.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.116.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.126.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.126.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.316.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.316.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.804.326.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.804.326.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.116
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.116
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.126
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.126
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.316
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.316
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.326
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.326
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.116.508
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.116.508
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.126.508
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.126.508
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.316.508
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.316.508
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.326.508
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.326.508
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.116.005
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.116.005
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.126.005
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.126.005
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.316.005
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.316.005
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.326.005
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,5mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.326.005
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.116.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.116.008
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.126.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.126.008
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.316.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.316.008
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.326.008
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.326.008
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 92.810.126.098
Conductor cross section 0,5-1,0 mm²
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: gal.Sn
Plug thickness: 0,8mm
L1: 10,25mm
L2: 7mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.810.126.098
|
|
Catalogue Page (PDF, 39 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.116
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.116
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.126
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.126
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.316
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.316
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.326
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,4mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.326
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.116.008
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.116.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.126.008
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.126.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.316.008
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.316.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.815.326.008
Conductor cross section 1,0-1,5 mm²
|
Conductor cross section 1,0-1,5 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1:6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 5.000
Article-No. 22.815.326.008
|
|
Catalogue Page (PDF, 17 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.116
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,4mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.116
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.126
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,4mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.126
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.316
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,4mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.316
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.326
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,4mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.326
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.116.008
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.116.008
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.126.008
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.126.008
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.316.008
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.316.008
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 22.802.326.008
Conductor cross section 0,14- 0,25 mm
|
Conductor cross section 0,14-0,25 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1: 6,75mm
L2: 5,8mm
Material thickness: 0,35mm
Packing unit: 6.000
Article-No. 22.802.326.008
|
|
Catalogue Page (PDF, 34 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.116.005
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.116.005
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.126.005
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.126.005
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.316.005
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.316.005
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.326.005
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.326.005
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.116.008
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.116.008
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.126.008
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.126.008
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.316.008
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.316.008
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.326.008
Conductor cross section 0,5-1,0 mm² | with locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.326.008
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.116.205
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.116.205
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.126.205
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.126.205
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.316.205
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.316.205
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.326.205
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,5mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.326.205
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.116.208
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: bare
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.116.208
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.126.208
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuZn
Surface: Sn
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.126.208
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.316.208
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: bare
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.316.208
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
Angle flat push-on receptacle 92.809.326.208
Conductor cross section 0,5-1,0 mm² | without locking point | bottom with contact points
|
Conductor cross section 0,5-1,0 mm²
Material: CuSn
Surface: Sn
Plug thickness: 0,8mm
L1: 7,85mm
L2: 5mm
Material thickness: 0,3mm
Packing unit: 8.000
Article-No. 92.809.326.208
|
|
Catalogue Page (PDF, 36 kB)
to the top of page
|
|
|
News
Certificate ISO 9001
Enclosed you can download our current certificate
More information
|
|